Item Type: CNC lathe controllerModel: CM35L-10System Composition:Control System Mainly Composed of Following Parts:High-performance, high-speed 32-bit CPULCD monitor (Resolution: 192 x 64)Special motion control chip (Signal Output: 5V pulse + direction)Input / output (14 photoelectric isolation 24V input, 8 photoelectric isolation 24V output, single channel rated 500mA)Maximum Program Line: 480 linesContact key array (28 keys)System Indicators:Minimum Data Unit: 0.001mmMaximum Data Size: 99999.999mmFast Motion speed Limit: 9000mm / min (when pulse equivalent is 0.001mm)Maximum Processing speed Limit: 9000mm / min (when pulse equivalent is 0.001mm)Maximum Pulse Output Frequency: 150KHzControl Shaft Number: 1-4 axis (X, Y, Z, C)Linked Shafts Number: X, Y, Z, C axis can be linearly interpolated, X, Y can be circularly interpolatedElectronic Gear: Numerator: 1-99999, Denominator: 1-99999System Main Functions: Automatic, manual, program, parameter, self-check, setting, etc.Optional Style: Single-axis / Biaxial / Tri- axis / 4-axis (optional)Package List1 x Controller1 Pack x Accessory1Supports automatic operation including dry running and single-step running, CNC lathe controller 's manual operation including motor CW /CCW, back to program 0, back to mechanical 0 and output control. 2Direct output terminal interface on the back reduces the transfer board, the terminals on the back can be directly wired, clear and convenient, which saves costs 3Isolated IO port means that with input and output ports isolated from the system, the output port capacity can be up to 1A 4You can directly use the USB cable to power the system, which is convenient for the transmission of the boot screen and the program, learning and operation 5With 20 control commands, external manual supports control motor CW /CCW, start, pause, alarm, emergency stop, etc. 6CNC lathe controller's parameters include system parameters, system self-test, IO settings, user and manufacturer password management, etc. And it also supports program editing, reading, deleting and saving. 7Newly developed motion controller uses a high-performance 32-bit CPU, the driving equipment uses a subdivided stepper motor or servo motor, equipped with a liquid crystal display, a completely enclosed touch operation keyboard, while the system has high reliability, high precision, low noise and simple operation.