Feature: 1. This adapter card supports 3 x 5cm mSATA SSD to USB 3.0 interface, which is convenient and practical. 2. The riser card is a USB 3.0 interface, plug and play, no need to install any drivers, simple and convenient. 3. This conveter adapter card can support for Win 2000 / Vista / 7/ 8 / OS X 7.0 and higher systems. 4. The quality of this PCBA conveter adapter card is guaranteed under the inspection of premium standards. 5. Professional manufacture insures you higher quality products, you can buy it with ease. Specification: Item Type: Riser Card Interface: USB3.0 Support Hard Disk: MSATA Support System: For Win 2000 / Vista / 7/8 / OS X 7.0 and higher. Package List: 1 x Riser Card Note: Please pay attention to check the rated current of the solid state drive, and calculate the maximum power supply current of the USB 3.0 interface as 1A. If the USB port cannot provide enough current for the solid state drive, the computer will not be able to recognize it or not work normally. The power supply cannot meet the requirements; if your computer has such problems in the USB 3.0 interface, please try to access it, and then try to test it, because it will reduce the speed and thus the power consumption.It is not compatible with SATA MINI PCI‑E SSD / PATA MINI PCI‑E SSD and RAID MINI PCI‑E SSD.SSD work will release heat, and the casing will be hot when it falls off, which is normal.Please try not to use a USB extension cable, because it will not meet the requirements of the normal operating current of the SSD.If your hard drive has a password set on the original computer, please cancel the hard drive password; if you do not cancel the password, another computer will not be able to recognize the hard drive.Please enter the Disk Manager to partition and format the hard disk. If you open "My Computer", you cannot see the increase in disk partitions.