描述
Features:
<br>Electrical parameter measurement function (voltage, current, active power, energy, frequency, power factor)
<br>Overload alarm function (over power alarm threshold, backlight and power flashing to alarm).
<br>Power alarm threshold preset function (can set power alarm threshold).
<br>The energy can be reset use the key.
<br>Store data when power off.
<br>Large-screen LCD
<br>Backlight function.
<br>
<br>
<br>Specification:
<br>
<br>Brand:PEACEFAIR
<br>
<br>Model:PZEM-020
<br>
<br>Working voltage: 80 ~ 260VAC
<br>Test voltage: 80 ~ 260VAC
<br>Current: 10A
<br>
<br>Rated power:10A/2200W
<br>Operating frequency: 45-65Hz
<br>Measurement accuracy: 1.0 grade
<br>Size: 9*5*2.5cm/3.5*2*1in
<br>Weight: Approx.85g/3oz
<br>
<br>
<br>
<br>Package list:
<br>1 * Digital Meter
<br>
<br>
<br>Appearance and Key function
<br>I.Display Interface
<br>Display interface is large-screen LCD, it can display six parameters at the same time.
<br>II.Display format
<br>1. Power: test range: 0~2200W, Starting measure power: 0.2W
<br>＜10W display format:1.00~9.99W
<br>＜100W display format:10.0~99.9W
<br>＜1000W display format:100~999W
<br> ≥1000W display format:1.00~2.30kW
<br>2. Energy: test range: 0~999kWh
<br>＜1kWh display format:0~999Wh
<br>＜10kWh display format:1.00~9.99kWh
<br>≥10kWh display format: 10~999kWh
<br>3. Voltage: test range: 80~260V
<br>Display format: 80~260V
<br>4. Current: test range: 0~10A,Starting measure current: 0.001A
<br>Display format: 0.000~10.00
<br>5. Frequency: test range: 45~65Hz
<br> Display format: 45~65Hz
<br>6. Power factor: test range: 0~1PF
<br> Display format: 0.00~1.00PF
<br> Key functions
<br>
<br>1. Backlight control
<br>Short press the key to turn on or off the backlight, the backlight has memory function, it can store the on or off state when power off.
<br>2. Reset energy
<br>Step1: Long press the key for 5 seconds until the energy value flash, then release the key.
<br>Step2: Short press the key again, then the energy value is cleared and exit the reset flashing state.
<br>Step3:If there is no operation on the key within 5 seconds, it means the energy value is not cleared and will exit the reset state.
<br>3. Set power alarm threshold
<br>Step1: Long press the key until the LCD screen display"SET CLr", then release the key to enter the setting state
<br>Step2: Power window display the current power alarm value and the last digit begin to flash, then you can short press to plus 1, when there is no operating over 3 seconds, it will switch the digit position automatically, the setting method is as same as the above.
<br>Step3: After finish the setting, long press the key over 5 seconds will store automatically and exit, the range of active power threshold is 0.0~2.5kW.
<br>
<br>
<br>Note:
<br>1. This module is suitable for indoor, please do not use outdoor.
<br>2. Applied load should not exceed the rated power.
<br>3. Wiring order can't be wrong.<br>1、Electrical parameter measurement function (voltage, current, active power, energy, frequency, power factor)
<br>2、Overload alarm function (over power alarm threshold, backlight and power flashing to alarm).
<br>3、Power alarm threshold preset function (can set power alarm threshold).
<br>4、The energy can be reset use the key.
<br>5、Store data when power off.
Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.
-
Fruugo ID:
428168378-899620038
-
EAN:
6471506613300
