[Product name] Riveter adapter [Product material] Carbon steel + plastic shell [Product weight] 0.4 kg \/ set [Product use] Pull nail [Product Features] Both fixed and assembled rivets are not easy to cast when drilling, which greatly improves the assembly efficiency. The advantages of the three-jaw pliers It is equipped with hardened, thickened and hardened claws. The claws are the most easily worn parts of the rivet gun for a long time After being thickened and hardened, the life of the rivet gun is greatly improved 1. Nails do not slip and flip nails quickly to improve work efficiency 3. The riveting is firm and the riveting effect is smooth without burrs 2. Strong biting force adopts 360 nail grip design to make the nail more consistent with the three claws 4Three-part structure is not easy to block. * Allen key support * Matching chuck Instructions for use: 1. Turn the rivet gun clockwise so that it does not move. Second, choose the correct hole diameter. The diameter of the shank of the rivet is exactly the same as the diameter of the hole. There is no space or the gap is large. It is not appropriate to put it in place and leave a small swivel space. Third, turn counterclockwise to push the three-jaw chuck J inside the rivet gun up, then insert the rivet, then turn it clockwise of a watch to tighten the rivet. You can try it out by hand and the rivet will not budge. . 4. Once the rivets are installed, turn the hand drill clockwise to pull out a rivet in an instant. Five, turn the hand drill counterclockwise again to easily remove the nail. 6. Turn counterclockwise to loosen and remove the adapter. Tips from the store: 1. The size is manually measured, please allow the error (1-3cm). 2. Due to the different monitor pixels, there may be some color difference, please refer to the actual product. 3.