High-performance octa-core 64-bit AIoT processor LCPIRK3576 development board: 6TOPS AI computing power, 8nm process technology, LPDDR4X memory Powered by the Rockchip RK3576 processor, it utilizes a heterogeneous multi-core architecture consisting of a quad-core ARM -A72 (2.2GHz) and a quad-core ARM -A53 (1.8GHz), supporting multi-tasking and parallel processing. With a 10/100M/1000M RJ45 Ethernet port, this microcomputer is ideal for audio and video entertainment and can also be used for Linux/Android programming learning and project development. It supports operating systems such as Android 14, 22.04, and Debian 12. Type-C USB 5V power port: 5V/2A or higher recommended. 16GB EMMC, model: KLMAG1JETD-B041, can be used to load the . Type-C USB 5V/DP port: can be used for firmware burning and also supports connecting to a DP-compatible monitor. MIPI camera port: supports the MIX415 8MP camera by default. UART0 debug port: can be used to view serial port debug output. Connect GND, TXO, and RX0 to the GND, RX, and TX pins of an external USB-to-TL serial port module (such as the CH340), respectively. The baud rate is 1500000. port: supports connecting to a monitor/TV with an port and supports audio output. POWER: short to turn the screen off/on; long to turn the device on and off. RECOVERY: and hold this key before powering on the board to enter loader mode. For boards with a functioning system, this key can be used for system recovery/upgrade operations (generally unused). Maskroom: and hold this key before powering on the board to enter Maskroom mode for flashing the system to the EMMC (this is the typical method for flashing the system). Electret microphone: Can be used for recording. 3.5mm stereo headphone & microphone jack, compatible with 4-way US-standard headphones. Plug-in TF card slot: Accepts a TF card with an installed. Boots from the TF card by default when a TF card is inserted; otherwise, boots from the EMMC. MIPI display interface: Supports three RGB888 LCD screen sizes: 5.5-inch (1080 x 1920), 7-inch (1024 x 600), and 10.1-inch (800 x 1280). (Requires flashing the corresponding system to drive the corresponding screen). Color: Blue Material: PCB Package Contents: 1 * RK3576 Development Board Kit Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.