Item Type: Sharpener ChuckModel: 3-9mm Grinding Machine ChuckHardness: HRC40-45Clamping Accuracy: 0.02mmClamping Range: Approx. 3mm / 0.12in, 4mm / 0.16in, 5mm / 0.2in, 6mm / 0.24in, 7mm / 0.28in, 8mm / 0.31in, 9mm / 0.4inCollet Total Length: Approx. 122mm / 4.8inCollet End Diameter: Approx. 20mm / 0.8inTail Thread: M20Tail Thread Length: Approx. 29mm / 1.1inRod Diameter: Approx. 20mm / 0.8inPackage List1 x 7mm Chuck1. Put each type of chuck into the corresponding diameter tool to avoid damage to the chuck because the diameter of the tool exceeds the size of the chuck model.2. When changing tools, clean up the impurities inside the jacket in time to ensure the service life of the chuck.1The collet is integrally formed with a long total length and is suitable for installation on a knife sharpener. 2The clamping force is strong, and the clamping accuracy is 0.02mm, which is suitable for fine operation. 3The accuracy of the aperture is high, the thread size is standard, and it is not easy to fall off during installation and use. 4Different size specifications have different clamping ranges, which are suitable for different clamping situations. 5Made of high-quality metal materials, the hardness is HRC40-45, and it is not easy to be squeezed by the outside world.