Feature:1. LIQUID CRYSTAL DISPLAY: 2.4in 320X240 TFT LCD with clear graphical interface, 100MHz high accuracy frequency meter and 32 bit counter2. TECHNICAL PARAMETERS: Sampling rate 200MSa/S, vertical resolution 13 bits, storage depth for 8k, built in 5 basic waveforms and 32 arbitrary waveforms3. WAVEFORM STORAGE: Support internal storage of 50 groups of user defined edited waveform, pulse wave output set at the edge time4. INTERNAL EXTERNAL MODULATION: Internal AM, FM, PM modulation function (external AM, FM, PM modulation is optional). Internal or external ASK, FSK, PSK modulation function5. INDEPENDENT OUTPUT: Dual channel output, maximum output frequency 60M, output linear or logarithmic sweep frequency and burst (pulse train) waveform. The two channels are independent of each other, with phase synchronization function6. INTERFACE SETTINGS: Standard USB device interface, optional external analog modulation interface, with a multifunctional arbitrary waveform editing softwareSpecification:Item Type: Signal GeneratorModel: ET3320CSine Wave: 1Hz to 20MHzSquare: 1Hz~15MHzTriangle: 1Hz to 15MHZPulse: 100Hz~6MHzArbitrary: 1Hz to 6MHzFrequency Resolution: 1HzFrequency Accuracy: 20ppmFrequency Stability: 1ppm/3 hourPower Supply:Power Supply Voltage: AC 110~240V, 50~60HzPower: <15WDisplay Screen:Type: 2.4in TFT LEDResolution: 320x240Color: 16M colorState:Temperature Range: Operating Time: 10~+40; Idle : -10~+60Cooling Method: Natural coolingHumidity Range: Below +35: 90% Relative humidity; +35 ~ +40: 60% Relative humidityInterface: USB device.Package List:1 x Signal Generator2 x Test Clamp Wire1 x Plug1 x Connecting Wire1 x USB Cable1 x User ManualNote:Ensure the instrument is grounded reliably.