描述
Support almost all -wire or two-wire LED driver IC, such as WS2811,WS2812B, WS2801, SK6812, SK6812-RGBW,WS2813, LPD6803, LPD8806, APA102, APA105, TM1804, TM1814, TM1914, TM1913, P9813, INK1003, UCS1903, DMX512. You can choose R/G/B channel order.
200 kinds of color change modes, auto mode and static color mode, which are vivid and beautiful. Save user setting automatically when power off. Brightness is adjustable.
IOS and Android APP control via Bluetooth 4.0 or later version. Long control distance, convenient to use. Support IOS 8.0 and Android 4.4 or later version. Your smart Phone should support Bluetooth 4.0 or later version.
DC5V-24V wide working voltage, preventing reverse connection of power supply, protecting LED light and controller very well. Support setting controlled the total pixels number.The maximum number is 2048 pixels.
Can not work? Please check output voltage and amp of your power supply and confirm whether it can match controller and led lights. If the power supply, controller and led lights can be compatible with each other well, please connect them and set up again as the last product picture shows. Please set enough total pixels number, correct RGB order and IC type. Otherwise they cannot work smoothly.
Product weight: 40g
Remote distance: About 20 meters
Model: SP105E Bluetooth Color Controller
Precautions:
To control WS2812B , please choose WS2811 and on the setting page.
The controller only supports LED lights with smart IC. It cannot support ordinary RGB/RGBW without IC.
Search "-LED"or scanning the QR code on the operating instructions to download and install the App.
Please use a power supply not a battery to power the controller. The output power of power supply must be more than the max power of led light. For example, if the work voltage and max amp of your led light is 5V 10A 50W, power supply output must be 5V 10A 50W at least. rwise, it will work smoothly.
If the color is wrong, for example, you choose the red, but the color of the light strip is green, you need to choose a different settings, such as RGB, RBG, , GBR, BGR or .
color: White
Material: ABS
Size: 85*45*22mm
Package Contents:
1x SP105E Bluetooth LED controller
1x 3pin female JST connector
1x Mini screwdriver
1x User manual
Only the above package content, other products are not included.
Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
-
品牌:
Unbranded
-
类别:
游戏手柄
-
颜色:
White
-
Fruugo ID:
329954691-728262787
-
EAN:
8094263318165
产品安全信息
请参阅下面列出的特定于该产品的产品安全信息
以下信息由销售该产品的独立第三方零售商提供。
安全警告:
important Safety Instructions Read Before Use: Please read all instructions and safety warnings before using this product. Failure to follow these guidelines may result in injury, damage, or malfunction. General Warnings Intended Use: Use this product only for its intended purpose as described in the user manual. Supervision Required: This product is not intended for use by children or persons with reduced physical, sensory, or mental capabilities without supervision. Inspection Before Use: Check for any signs of damage or wear before use. Do not use if damaged. Proper Operation: Follow all operating instructions carefully. Avoid improper handling or misuse. Power Source: Use only the recommended power supply or batteries. Do not exceed specified voltage or current ratings. Repairs: Do not attempt to disassemble or repair the product. Contact authorized service personnel for assistance. In Case of Malfunction: If the product malfunctions or exhibits unusual behavior, discontinue use immediately and contact customer support. Disposal Instructions Recycling: Dispose of the product in accordance with local electronic waste disposal and recycling guidelines. Battery Disposal: Follow specific regulations for the safe disposal of batteries if included.
