Tech2 Vehicle Chassis Power System Inspection Scanner, US Plug 1. Connect the cigarette lighter power cord to the main power interface. Do not plug it directly into the head unit, as this will burn out the VCI module or even the entire head unit.US standard power cable allows direct connection to the main unit's power connector. 2. Language: English 3. Upgradeable hardware ensures the instrument remains up-to-date. 4. Large screen with high-brightness backlight. 5. Equipped with RS232 and RS485 ports for connection to computers or other instruments. 6. Stores and replays fault codes, locks data frames and fault records. 7. Allows observation of vehicle diagnostic test status during road tests. 8. User-friendly button layout for easy operation. 9. Uses a 32MB card with large capacity and easy upgrades. 10. Connects to a CANdi module to detect vehicles equipped with CAN systems (optional). 11. Technicians can use the repair programming system to reprogram and set up the computer systems of vehicles manufactured after 1993. This requires a computer and Tech2. Repair and programming system CD 12. COMPATIBLE factory software with powerful and comprehensive testing functions, testing the powertrain, body, and chassis. Operation steps are as follows: 1. Power on the instrument. The instrument will enter self-test mode, and the screen will display "SYSTEM INITIANLIZING" for approximately 4 seconds. The instrument will beep once, and the screen will display the instrument version information. 2. Press the Enter key to enter the main menu. The screen will display: F0 - Diagnostics, F1 - Service Program System, F2 - Display Capture Data, F3 - Tool Options, F4 - Enable. 3. Use the up and down cursor keys to select the target and press the Enter key to confirm. 4. Select the F0 function to enter the vehicle specifications option. Use the cursor keys to select the model year. Press the Enter key to enter the vehicle system, select the appropriate type, and press the Enter key again to enter t