TFT LCD Screen with Digitizer Full Assembly – Not Compatible with Fingerprint Identification Before Installation: Test the screen before installation. Do not remove any protective films or tags during testing. Take precautions against static electricity. Always ground yourself using an ESD (electrostatic discharge) strap before beginning any repair to prevent damage to internal components. Wear eye protection and handle the glass with care to avoid injury from sharp edges. Screen Replacement Testing: This is a fragile component. Testing before installation is strongly recommended. To test, disassemble the phone, connect the motherboard, LCD or screen, and o cable with the new replacement, then power on the device. If the screen functions properly, proceed with installation. If there is no display, contact support immediately. Do not force installation if the screen does not work. No responsibility will be taken after the screen has been installed. Cable Handling: Avoid excessive bending of the LCD cable. Bending beyond 90 degrees may result in a black display. Product Features: - LCD and touch screen digitizer full assembly replacement - Replaces broken or non-functional screens - Restores device appearance and functionality - Designed for proper fit and performance - Each unit is inspected and confirmed in good condition prior to shipping - Professional installation is highly recommended - Not compatible with fingerprint identification functionality