Note: 1. In order to get better transfer effect, the machine should rest for a few minutes after transferring 1?2 sheets of paper._x000D_2. To preserve the machine, please do not transfer continuously, it is recommended to cool down after use._x000D_3. Tattoo stencil machine is not suitable for shading complex patterns, only a single effect can be displayed._x000D_It is recommended to transfer lines and simple patterns to achieve the best results. specification: Item Type: Tattoo Stencil Printer_x000D_Material: ABS, electronic components_x000D_Input Voltage: 100-240V, 50-60Hz / 1.2A_x000D_Scanning Mode: CIS_x000D_Effective Scanning Width: Approx. 210mm / 8.3in_x000D_Scanning Resolution: _x000D_Horizontal: 8dot / mm_x000D_Vertical: 7.7line / mm_x000D_Document Type: FINE, PHOTO_x000D_Document Size: A5-A4_x000D_Document Thickness: Approx. 0.06 x 0.15mm / 0 x 0.01in_x000D_Recording Mode: TPH_x000D_Effective Printing Width: Approx. 210mm / 8.3in_x000D_Power Consumption: Standby 5W_x000D_Working Environment Temperature: 5-35_x000D_Relative Humidity: 20%-80%_x000D_Size: Approx. 290 x 170 x 70mm / 11.4 x 6.7 x 2.8in_x000D_Different key combinations for different transfer modes._x000D_Depending on the type of manuscript, you can select different transfer modes by setting different key combinations on the panel, You can select different transfer modes by setting different key combinations on the panel._x000D_Key Combination: PHOTO, Pure Black Line Draft: off, Pure Black Block Draft: off, Lighter Gray Scale Draft: light, Darker Gray Scale Draft: light_x000D_Key Combination: DEEPNESS 1, Pure Black Line Draft: off, Pure Black Block Draft: light, Lighter Gray Scale Draft: off, Darker Gray Scale Draft: light_x000D_Key Combination: DEEPNESS 11, Pure Black Line Draft: light, Pure Black Block Draft: off, Lighter Gray Scale Draft: light, Darker Gray Scale Draft: off_x000D__x000D__x000D_How to Use: _x000D_1. Panel Description: _x000D_DEEPNESS I: The indicator light is on and the original concentration is set to depth I, while the key indicator light of DEEPNESS II will be off. _x000D_DEEPNESS II: The indicator lights up, the original concentration is set to depth II, and the key indicator of DEEPNESS I will be off at the same time. _x000D_PHOTO: Press this key to switch between picture and fine, if it is picture, the indicator light will be on. _x000D_MIRROR: Press this key to switch between mirror copy and normal copy, the system default setting is mirror copy, if it is mirror copy, the indicator light will be on. _x000D_STOP: Stop the Transfer._x000D_COPY: After inserting the manuscript, press this key to start the transfer. _x000D_POWER: Power indicator, the indicator lights up when the machine is powered on. _x000D_ERROR: error indicator, the light is on when the thermal head is overheated. _x000D_2. Adjust the scanning depth and transfer depth of the machine._x000D_You can adjust the scanning depth and printing depth of the machine according to your actual needs. The steps are as follows: _x000D_ Press and hold the STOP key for 3 seconds, the machine will sound and the light will be on. _x000D_Short press STOP key, adjust the scanning depth, 1 sound scanning deepest, 7 sound scanning shallowest. _x000D_Short press the COPY key, adjust the depth of the transfer, 1 sound transfer the shallowest, 7 sound transfer the deepest. _x000D_ long press the STOP key for 3 seconds, the machine sound, the light recovery, that is, the completion of the scan, the transfer of deep, shallow adjustment. _x000D_3. How to Calibrate the Machine: _x000D_The image sensor and thermal sensor in the machine are sensitive to the brightness and temperature of the surrounding environment, will naturally change over time, copy the picture and the original color difference, please scan and calibrate in time, the operation steps are as follows:_x000D_ Press and hold the "STOP" key for 3 seconds, you can hear the machine "beep" sound, all the lights are on._x000D_ Insert a flat sheet of A4 paper into the paper feeder and press the "MIRROR" key for scanning calibration._x000D_Automatically feed the paper during calibration, and finish scanning calibration after spitting out the complete white paper._x000D_Press and hold the "STOP" key for 3 seconds, hear the machine "beep", all lights return to normal, that is, the calibration is complete. _x000D_4. Using Method: _x000D_(1) Turn on the power, turn on the power switch. _x000D_(2) Open the machine paper bin flap, from the transfer paper input port into the machine transfer paper. _x000D_(3) Put the manuscript pattern face down from the manuscript input port. _x000D_(4) Set the transfer mode, and press the start button to start the transfer. Features: 1LIGHTWEIGHT MATERIAL: This tattoo transfer machine uses ABS shell, environmental protection, safety, durability, lighter weight, smaller size, more convenient to use. 2STRONG FUNCTION: The machine button design simple, powerful, can transfer dif