Description:Features:1. New materials are being updated, with thin surface and much higher strength and toughness2.One-on-one, really3. Press and hold the "key" to replace the original part, otherwise all parts will not be missed.4.No damage to the installation method, no drilling, no electric welding, can be modified, can also be restored.5. The key control program connecting the communication line is controlled by the original machine, supporting formal calibration tools.Installation instructions:Some people in the front so can't be beat please start it from the front double-sided floor mat and the back shine2. If the heat insulation wire screw is tightened, it is not too tight, as long as it is not shaken If the plastic fragments are too tight, they will wear away.Just stand under the hat, grab the bottom with your hand, and press the top. Be careful when you're out there you might touch the pen cap on the right4. Do not press the line when the plastic gap is installed above the shell5. Watch the surveillance and start monitoring the hardwarePackage Included:1.Mod Control Lever Change Module Adapter Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.