Reusable, Easy to Use: Tile leveling systems are wear-resistant and reusable, it was quite easy to attach or remove with a special wrench. suitable for 3mm to 16mm thickness of the slab, suitable for a gap between slabs 2mm. Improve Installation Speed: Tile leveler can improve tile installation speed and reduce installers fatigue / stress. The tile leveling system ensures the flatness between the tiles avoiding unevenness. It solves the issue of cracking the ground, provides a flat ground. Save Time Without Moving: Reduce grinding and polishing time after using this tile leveler. Prevent the tiles from moving during curing. it is an excellent tool for the construction of floor / wall buildings. Package included: There are 100 pieces of tile levelers and 2 special wrenches for this item. Product description Tile Leveling System Kit, Good DIY Tool for Building Wall Flooring. Specification: -Name: Tile leveling system -Color: Orange + Black -Material: Stainless steel PP + 430 -Packing Quantity: 100pcs -Weight: 1310g / 2.89lb Package includes: 100pcs Tile Levelers 2pcs wrench Features: -Reusable corners. - Prevent the tiles from moving during the cure. -Reduce the need for grinding and polishing. -Ensures the flatness between the tiles avoiding unevenness. -Improve tile installation speed and reduce installer fatigue / stress. Instructions: 1 lay the first piece of ceramic, seam 2mm or more. and close to the second ceramic; 2 Insert the T-pin along the crack, then rotate it 90 degrees, attach the T-pin to the bottom oftighten the adjustment cover so that the two ceramics are at the same level; 3 Before the cement or tile adhesive is completely dry (usually no more than 6 hours),tighten the adjustment cover in the opposite direction, then turn the T-spindle 90 degreesso that the T-pin turns into a zigzag parallel to the tile and removes the leveler; 4 storage Clean, dry storage for reuse.