Universal Ceiling Fan & Light Remote Control Kit with Timing Wireless Switches

1. Position the fan so that it is not under any load and the cover or uneven ceiling is not damaged.2. Do not connect the input and output wires of the receiver or any switches together.3. The fan has a pull-cord switch and a remote control receiver. Pull the switch on the fan all the way up and turn on the light to control the fan with the remote.4. Observe the wire colors and the instructions on the junction box.5. Becompatible withe using the remote control, check that the battery is inserted (ensure correct polarity). The indicator light will flash after each button press.3. The remote control has a pull-cord switch and a remote control receiver. Pull the switch on the fan all the way up and turn on the light to control the fan with the remote. Control channels: 2 (1 fan, 1 light)Range: 30 meters outdoorsBattery type: 2 x AAA batteries (not included)Rated voltage: 90–220 VLoad power: Fan 300 W, LED light 200 W, incandescent bulb 1000 WFan: Low/Medium/High/Off. Timer: 1/2/4/8 hoursLight: On/OffVoltage: 110–220 VFrequency: 50–60 HzNote: Ensure there is sufficient space on top of the fan compatible with the receiver to be installed.① Input: Neutral (white wire)② Input: Live (black wire)③ Output: Neutral (white wire)④ Connection: Live (black wire)⑤ Connection: Live (blue wire)⑥ Antenna cable (Do not shorten! Do not connect!)Color: Black & WhiteMaterial: PCSize: Remote control: 13.2 x 5 x 1.8 cmReceiver: 11.4 x 5.1 x 2.5 cmPackage contents:1 x Remote control (battery not included)1 x Receiver1 x Mounting bracketOnly the above package contents are included. Other products are not included.Note: Light shooting and different screen settings may cause the color of the item in the picture to be slightly different from the original. The measurement deviation is +/- 1-3 cm.