Upgraded EWRF TS5823 Pro 5.8GHz 40CH 600mW FPV Transmitter VTX With CMOS 1200TVL Camera For RC Drone Precise details: -Description: Brand Name: EWRF Item Name: FPV Transmitter + Camera Combo -Specifications of FPV Transmitter: Item Name: TS5823Pro Frequency: 5.8G Channel: 40 Transmitting Power: 600mW/OFF(Pitmode) Working Current: 230mA (12V) Power Supply: DC 7-24V Weight: 5 g Dimension: 30x20x8mm -Specifications of FPV Camera: Size: 22mm x 22mm Format : PAL PAL: 1920H×1080V(1MP) NTSC: 1020H×1920V (1MP) Horizontal Resolution : 1200TVL Video Output : 1.0Vp p/75ohm AGC : 0.25/0.50/0.75/1.00 4 levels adjustable, up to max. 55dB WB : ON/OFF Exposure Type: electronic exposure Electronic Shutter : 1/50(1/60) 1/100000 second Gamma Correction : 0.45/1.0 Synchronization Mode : inter sync Lens: 2.5mm Working Voltage: DC 5 to 12V(wide voltage , measured 5 to 13V) Working Current: 70mA(ow power consumption) Working Temp.: -20degree to 60degree Wetness: 0% ~ 98% -Features: - 600mW/OFF(Pitmode) - Miniature and light weight design - 5V BEC output for camera,RC receiver - Clean powerup and channel switching without interference to others - Overheating protection to prevent premature damage. -User Guide 1. Setting After power on, the digital display shows the following three parameters in turn: band, channel, and frequency.Press and hold the button can be entered into the parameters setting. - Press and hold the button,the digital display will shows the alphabet for band(A-b-C-d-E), press the button can select the bands. - Press and hold the button again, When the digital display shows the Arabic numerals for the channel (1-8),press the button can select the channels. - Finally, press and hold the button,VTX is back to normal working state and the band,channel,frequency will display in turn on the digital display. 2. Pitmode Work State - Press the button twice will toggle the ON/OFF of Pitmode. - Pitmode work state: Press the button twice, the red dot appears on the right bottom of the digital display which means the VTX is off . - Normal working state: Press the button twice again, the red dot disappear on the right bottom of the digital display which means the VTX is on, the VTX is back to normal working state. - Pitmode transmits a tiny amount of power and the transmitting distance is about 2- 3 meters. -Frequency(Mhz): Band CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 A 5865 5845 5825 5805 5785 5765 5745 5725 b 5733 5752 5771 5790 5809 5828 5847 5866 C 5705 5685 5665 5645 5885 5905 5925 5945 d 5740 5760 5780 5800 5820 5840 5860 5880 E 5658 5695 5732 5769 5806 5843 5880 5917 -Note: 1.Make sure that there is enough space for airflow when installing the module on the drone 2. Please install the antenna before powering up for a longer use life. -Package Included: 1x EWRF TS5823Pro FPV Transmitter 1x 1200TVL Camera 1x Antenna 2x Cable