USB Microphone 192Khz Capacitive Microphone USB Mobile Phone Computer KARAOKE Live Game Voice Chat Recording Microphone Stand Set Description: Power requirements-The microphone is powered by your device s USB port , meaning that in most instances you can just plug the microphone in and get started right away . For non - standard USB ports , a powered US hub may be required . The is a Plug & Play USB device. both and computers . It is a plug / play " US device , both and computers . Placement of the Microphone and relative to the vocalist may by varied on several factors including room acoustics , the vocal performance , and whether the vocalist has a high or voice . An ideal starting point for the reference is to place MIC directly in front of the lead.15 cm (6) distance. Moving the vocalist a little closer will make the vocal sound more and full , while moving the vocalist back will give the vocal a little more or room sound , and will reduce the proximity affect ( increased or low frequency response when the sound source is very close ).Experimentation should be made with the angle from which the microphone is addressed , as dierent results can be achieved when the vocalist is o ?- to the microphone ( and the gold ). Microphone setup 1. Plug end of the USB cable into the USB port of the microphone and connect the other end to the computer . connecting the audio cable , you can start working directly . 2.If you need volume control , turn the knob to the right . Set your input : The microphone has been set to an ideal internal gain setting . If you need to set your preferred sensitivity to the microphone and listen to the earphone s sound size . follow the following steps : 1. Check the hardware devices on the computer to see if there are any USB AUDIO devices . 2.Open the computer AUDIO equipment and input the AUDIO input terminal ( i . e . microphone input ). Select USB AUDIO microphone input device "; Select USB AUDIO headset device " at the output ( that is headphone listening ); In this way , the desktop microphone caner put to the computer in the early morning. computer voice output to the headset ; 3.The sensitivity of the microphone can be adjusted in real through the sound card attribute microphone. It can be adjusted well according to preference. 4. Can monitor the size through the total volume of the computer ; 5.If the desktop microphone is used alone , the sound card device can be disabled on the computer device to conflicts ; 6. If the computer cannot recognize the desktop microphone , choose to disable the sound card . The device must be " USB AUDIO or other names can be displayed to uninstall the device driver . 7. If the sound is low , check whether the sound volume of each sound card software property is adjusted ; 8.The volume of microphone can be adjusted by the knob in front of the desktop microphone. General cont To manually adjust your input via your computer s system preferences , use the following instructions relevant to your device platform / operating system . Adjusting the input on a computer : 1Click on the at the top left of your screen , and select System Preferences . Specification: Sound hesd : Capacitive Requency response :30Hz-20Khz Ditectivity : Heart - Shaped (0-180 1KHz>5db) The loudest :120dB S . P . L Signal to noise :10dB Seneitivity :25MV/ Pa (-32db2db) Words put function :+ dB -+25dB gain is regulable Audio output line :5mmX1.5m USB cable :3.5mm gold - plated plug Power supply : USB DCSV power supply Weight: 1165g/2.56lbs Net weight: 965g/2.12lbs Size: as photo show Packing size: 42x20x6.5cm/16.5x7.87x2.55" NOTE: 1.Do cover the microphone grille with your hand . 2.Regular maintenance is recommended to avoid electricity erratic and acoustic problems . Packing included: 1x microphone 1x specification 1x USB cable 1x Arm Stand 1x Shock Mount 1x Filter 1x Foam Mic Windscreen 1x Table Mounting Clamp