WOOD MOISTURE METERThis needle-free moisture meter detects humidity non-destructively thanks to the imported sensor on the back. It has no pins and does not damage the material being tested. Rapid detection of various materials by transmitting and receiving high-frequency electromagnetic wave signals to the measuring material. Locating the moisture distribution in wood/walls/floors/ceilings lets you know exactly where the moisture is most concentrated. INTELLIGENT EQUIPMENT The moisture tester adopts a large LCD color display screen and a color analog display bar, which makes it easy to view the measurement results. When the wood humidity reaches 17%, the instrument will automatically alarm, and when the wall humidity exceeds 70%, it will automatically alarm. When the alarm is issued, the instrument will beep and the display bar on the screen will show the red part. EASY TO USE This hygrometer can detect temperature and humidity ambient temperatures, as well as / temperature display switching function. With data hold function and one-key clear function, it can save the current measurement value for easy recording. Automatic shutdown in 10 minutes to save battery life. ZERO Calibration - Used to detect anomalies in surfaces that must be uniform. MEASUREMENT AND USE The wall moisture tester has measurement modes: SOFTWOOD| HARDWOOD | DRY WALL | MASONRYE. Can be used to measure all kinds of stones, wood, cement, paper, mobile homes, caravans. It provides a quick, non-destructive indication of moisture distribution near surfaces and is an excellent tool for homeowners, carpenters, floor inspectors to identify leaks and water infiltration problems.