1、Safe Performance: The rectification and braking circuit part uses integrated module design, the heat dissipation and reliability make the performance of the entire system to be safe. 2、Sealed and Waterproof Design: Adopt sealing waterproof design, do not have to worry about the controller is burned after the short circuit, the protection level is IP67, can be used in the air humidity, salinity, stagnant water, etc. 3、Good Heat Dissipation: The outer shell is made of anti corrosion aluminum, and the multi edges floor design increases the heat dissipation area, so that the controller can better dissipate heat. 4、Can charge the Battery: The wind turbine can be controlled to charge the battery, when the battery is full, the wind turbine will brake, and when the voltage drops to the recovery voltage, the charge will be resumed. 5、Multiple Protection: With multiple protections such as waterproof, strong wind, anti reverse connection, and temperature compensation, etc. 6、Wide Applications: Mainly used for wind power generation systems, wind and solar hybrid power generation systems, etc., for engineering or household use. 1 x Wind Generator Controller Item Type: Wind Turbine Generator ControllerProduct Model: FW10-24Rated Battery Voltage: 24VWind Generator Rated Power: 1000WWind Generator Braking Voltage: 30VWind Generator Recover Voltage: 27VQuiescent Current: ≤15mAProtection Level: IP67Working Temperature: -35℃-+75℃Shell Size: Approx. 150 x 132 x 48mm / 5.9 x 5.2 x 1.9in